Skip to main content

Learning PLC programming as an old electrician

 Learning PLC programming as an old electrician can be challenging, but it is definitely achievable with the right approach and mindset. Here are some tips that can help:


  1. Get familiar with the basics: Start by familiarizing yourself with the basic concepts of PLCs and ladder logic programming. Read books and online resources, and attend training courses or workshops.
  2. Find a mentor: Consider finding a mentor who can guide you through the learning process and provide practical insights and advice. You can also join online communities and forums where you can connect with other electricians and PLC programmers.
  3. Practice and experiment: The best way to learn PLC programming is through hands-on practice. Start by experimenting with simple programs and gradually move on to more complex ones as you gain confidence.
  4. Take advantage of online resources: There are many online resources available that can help you learn PLC programming, including video tutorials, online courses, and forums. Take advantage of these resources to supplement your learning.
  5. Attend training courses: Consider attending training courses or workshops that are specifically designed for electricians looking to learn PLC programming. These courses can provide you with a structured learning experience and hands-on practice.
  6. Start with familiar applications: When you are first starting out, it is best to work on applications that are familiar to you. For example, if you have experience in the manufacturing industry, you may want to start by programming a simple conveyor system.

In summary, learning PLC programming as an old electrician can be challenging, but with the right approach and mindset, it is definitely achievable. Take the time to learn the basics, find a mentor, practice and experiment, take advantage of online resources, attend training courses, and start with familiar applications. With patience and persistence, you can become proficient in PLC programming and expand your career opportunities.

Labels:

Comments

Post a Comment

Popular posts from this blog

Ferrules and Cross Ferruling

 Ferrules are identification labels provided for every wire terminations in an instrument, equipment, or electrical/instrumentation control panels. These tube-shaped sleeves can be inserted easily on each individual wire in a multi-core cable. In earlier days fixed digits/letters are used as ferrules, but now Instrumentation engineers/technicians prints out desired ferrules by using a ferrule printing machine. Typical Ferrule The numbers/ letters on the ferrules will be given as per the approved electrical hook up or loop diagrams. This helps technicians to easily identify a particular loop/wiring from a series of terminal blocks and to troubleshoot the desired terminal connection. Separate numbers on the ferrules distinguish the positive and negative polarities of wires, thus ensure the polarity protection of the instrument. Cross Ferruling  As a wire is connected on its both ends, it is quite useful to use a cross reference method for wire identification. Unlike normal ferru...
1 comment
Read more

PLC Program for Mixing Tank

 Create a ladder diagram for controlling a batch mixing process. Implement a PLC program for mixing tank or Mixing Process using PLC Ladder Logic. PLC Program for Mixing Tank Fig : Mixing tank A tank is used to mix two liquids. The required control circuit operates as follows: A. When the START button is pressed, solenoids A and B energize. This permits the two liquids to begin filling the tank. B. When the tank is filled, the float switch trips. This de-energizes solenoids A and B and starts the motor used to mix the liquids together. C. The motor is permitted to run for 1 minute. After 1 minute has elapsed, the motor turns off and solenoid C energizes to drain the tank. D. When the tank is empty, the float switch de- energizes solenoid C. E. A STOP button can be used to stop the process at any point. F. If the motor becomes overloaded, the action of the entire circuit will stop. G. Once the circuit has been energized, it will continue to operate until it is manually stopped. Solution...
2 comments
Read more

What is a Torbar? – Averaging Pitot Tubes

 The Torbar is employed for flow measurement of liquids, gases, or steam in circular, square, or rectangular section ducts for large flow rates. The Torbar is an insertion type multi-port self-averaging primary sensor for flow measurement. Torbar TORBAR is a set of Pitot tubes mounted on a bar across the pipeline with no moving parts. An averaging Pitot tube is a technology, while TORBAR is a manufacturing brand name. There are several brands available in the market with VERABAR, ANNUBAR, etc. Averaging Pitot Tube Principle Purpose Averaging Pitot tube can be employed when the average velocity of the flow profile, rather than the velocity in a specific point in the cross-section is desired. Averaging Pitot Tubes Principle It measures the differential pressure between the static pressure tap and the tap of full pressure of a stream. Thus such magnitude of differential pressure is directly proportional to the square of the flow rate. Working The TORBAR is designed in such a way that ...
7 comments
Read more