Skip to main content

What is Capillary Tubing? – Advantages and Disadvantages

 A capillary is generally built up from a tube, an armor, and optionally a protective sleeve.


Table of contents

Principle

Importance of Capillary Tubing

Tube Size

Capillary Tube Material

Precautions

Process Temperature Effect

Ambient Temperature Effect

Mounting Effect

Advantages

Disadvantages

Applications

Principle

The capillary tube is of small internal diameter, an appropriate method for separating a pressure instrument such as a gauge or transmitter from the process tapping/connection.


Capillary tubing is used to separate the direct connection between the measuring instrument and the process tapping point.


We can install the instrument as per our convenience and easy access for the maintenance. The capillary tubing is filled with some liquid inside it, usually it is glycerine but can be changed as per application need.


With help of this, the readings can be taken at a more convenient and accessible location to meet the demand for remote measurement/reading. 


Capillary tubes also serves as the purpose of a cooling element as the distance between the process tapping and the instrument will be more than the direct type installation. Also, there will be no direct contact between the instrument sensor and the process.

Importance of Capillary Tubing
A capillary tube is commonly used to connect the diaphragm seal remote with the pressure instrument.

It allows separation between the measuring instrument such as pressure gauge or transmitter with the process connection.

Using a capillary tube on a mechanical gauge normally requires the use of a gauge supporting arrangement and gauge adaptor or some other form of surface mount.

In a temperature measurement, the pneumatic temperature transmitter is connected with a sensor.

The sensor is a bulb filled with either mercury, gas, or vapor.

Through the capillary tube, expanded bulb fill makes the movement of the bellows or a C- type bourdon tube as per the corresponding temperature of the process medium.

The transmitter is located at an accessible place.

Tube Size
1/16 inch to 1/8 inch capillary tubes are used in instrumentation applications.

Capillaries with suitable diameters are used for optimal performance.
Capillary Tube Material
Stainless steel,
Copper,
Inconel,
Hastelloy.
Precautions
Precautions when using a capillary tube:

  • Process temperature effect.
  • Ambient temperature effect.
  • Mounting effect.
  • Process Temperature Effect
  • Process temperature effect on the diaphragm seal and of the fill fluid in the capillary through heat transfer.

The capillary tube has an excellent function for cooling down of process temperature changes.

But, the warming through of the process media temperature that causes the capillary tube to fill liquid to either expand or contract, the possibility of changing the volume of the fluid.

This is possible in the case of the short length of the capillary, this generates an error in the pressure reading as a function of the change of total volume of the tubing, pressure instrument, and diaphragm seal.

Ambient Temperature Effect
It includes seal temperature effect and ambient temperature effect.

Exposure of an electronic pressure transmitter to excessively high ambient or process temperature can impair the instrument operation, affect its performance or even lead to a partial or total failure of the instrument.

To prevent exposure to excessively high ambient temperatures.

Consider installing the instrument in a safe area from major heat sources.

In extremities, cool down the instrument vicinity using compressed air or any equivalent mean.

The seal temperature effect relates to the pressure produced on the diaphragm when the temperature changes. The pressure is corresponding to an expansion or contraction of the fill fluid in the capillary.

Mounting Effect
A level difference between the installed pressure instrument and the diaphragm seal creates a pressure indication error.

But, by the method of a known level difference can be compensated for during the calibration of the diaphragm seal assembly.

On differential pressure (DP) applications, the sealing effect is usually compensated by having the same length of capillaries for both LP and HP ports of the instrument.

Advantages
Protecting the instrument from high or low process temperature effects.

Personnel safety due to proper accessibility. 

Disadvantages
Longer capillary lengths affect the accuracy as subjected to ambient temperature effects.

Capillary length to be as short as possible to avoid delay response time.

Applications
Distant reading.
Capillary is to be used in combination with gauges, diaphragm seals, transmitters, switches.
Chromatography.


Labels:

Comments

Post a Comment

Popular posts from this blog

PLC Program for Mixing Tank

 Create a ladder diagram for controlling a batch mixing process. Implement a PLC program for mixing tank or Mixing Process using PLC Ladder Logic. PLC Program for Mixing Tank Fig : Mixing tank A tank is used to mix two liquids. The required control circuit operates as follows: A. When the START button is pressed, solenoids A and B energize. This permits the two liquids to begin filling the tank. B. When the tank is filled, the float switch trips. This de-energizes solenoids A and B and starts the motor used to mix the liquids together. C. The motor is permitted to run for 1 minute. After 1 minute has elapsed, the motor turns off and solenoid C energizes to drain the tank. D. When the tank is empty, the float switch de- energizes solenoid C. E. A STOP button can be used to stop the process at any point. F. If the motor becomes overloaded, the action of the entire circuit will stop. G. Once the circuit has been energized, it will continue to operate until it is manually stopped. Solution...
1 comment
Read more

What is Relay? How it Works? Types, Applications, Testing

 We use relays for a wide range of applications such as home automation, cars and bikes (automobiles), industrial applications, DIY Projects, test and measurement equipment, and many more. But what is Relay? How a Relay Works? What are the Applications of Relays? Let us explore more about relays in this guide. What is a Relay? A Relay is a simple electromechanical switch. While we use normal switches to close or open a circuit manually, a Relay is also a switch that connects or disconnects two circuits. But instead of a manual operation, a relay uses an electrical signal to control an electromagnet, which in turn connects or disconnects another circuit. Relays can be of different types like electromechanical, solid state. Electromechanical relays are frequently used. Let us see the internal parts of this relay before knowing about it working. Although many different types of relay were present, their working is same. Every electromechanical relay consists of an consists of an Elect...
1 comment
Read more

Chlorine dioxide Analyzer Principle

 Chlorine dioxide measurement Chlorine dioxide (ClO2) is an instable, non-storable, toxic gas with a characteristic scent. The molecule consists of one chlorine atom and two oxygen atoms – represented in the chemical formula ClO2. It is very reactive. To avoid the risk of spontaneous explosions of gaseous chlorine dioxide or concentrated solutions, it is generally handled in dilution with low concentrations. ClO2 is soluble in water, but tends to evaporate quickly. Typically it is prepared on site, for example from hydrochloric acid and sodium chlorite. The procedure provides solutions with approx. 2 g/l ClO2 that can be safely handled and stored for several days. Image Credits : krohne Sensor Parts : Reference electrode Applied chlorine dioxide specific potential Current needed to maintain the constant potential Counter electrode Measuring electrode The disinfection effect of ClO2 is due to the transfer of oxygen instead of chlorine, so that no chlorinated byproducts are formed. C...
6 comments
Read more